SpECbuild Primer E1

EPOXY RESIN BONDING AGENT FOR CEMENTITIOUS MATERIALS

SpECbuild Primer E1 is a two-part epoxy resin
bonding agent used to produce a high quality bond
between existing concrete surfaces and subsequently
applied cementitious or epoxy based materials.

Product Videos

Technical Details

SpECbuild Primer E1 may be applied onto clean, sound substrates to promote a high strength bond to cementitious materials such as in the following situations:
· Concrete repair applications
· Bonding of floor screeds
· Bonding newly poured concrete to existing concrete
· High mechanical strength
· Produces a bond that exceeds the cohesive strength of the concrete
· Provides an impervious barrier to the passage of chlorides
· Solvent free

Typical results after 7 days @ 20°C Compressive strength (BS 6319: Pt 2) 

50 N/mm²   
Slant Shear strength (BS 6319: Pt 4) 

40 N/mm² 

 

Typical results @ 

20°C  30°C 
Pot life  6 hrs 

3 hrs 

Max. overlay time  20 hrs 

10 hrs 

Initial hardness 

48 hrs  24 hrs 
Full cure  7 days 

7 days 

Preparation
It is essential that adequate preparation is carried out prior to the application of SpECbuild Primer E1.
The prepared surface should be free from laitance, dust, algae, oil and grease.

Mixing
SpECbuild Primer E1 is supplied in a two component kit, consisting of a base component and a curing agent.
Both of the components should be briefly stirred to ensure that any settlement products are fully suspended.
The entire contents of the curing agent should be emptied into the base component, ensuring that the sides of the curing agent tin are carefully scraped to remove all the material. The combined materials should then be mixed using a suitable slow-speed drill and mixing paddle for 2 minutes until uniform. The sides of the tin should then be scraped and mixing should continue for a further 2 minutes.

Application
The mixed product may be applied by brush. The theoretical consumption rate is 5 m2/litre.
Where SpECbuild Primer E1 is used as part of the SpECbuild concrete repair system, care should be taken to ensure an unbroken coating. One coat should be applied and allowed to gel. A second coat should then be applied and used to provide the bond.

Where a subsequent repair product is to be applied by spray, then sharp sand may be broadcast into the surface of the second coat of the primer.
SpECbuild Primer E1 is supplied in 1, 2 and 5 litre units. The theoretical consumption rate is 5 m²/litre.
Contact us for more info.

Product FAQ

Bardawil Ai

Ask it Anything!

Related Products

Get a call back

Need help? The Bardawil team's got you! Send us a message with your question, and we'll quickly be in touch.

Documents

Download TDS

Need Help?

+974 5533 5711

Send Us

WhatsApp Message

Email Us

sales@bardawil.qa

Industrial Area, Stress 42, Gate B3.

Barwa Commercial Avenue, Safwa Block Building 2, 2nd Floor

SpECbuild Primer E1

Submittal Request

Or, Get a Call Back