SpECtop PU500

FLEXIBLE POLYURETHANE COATING

SpECtop PU500 is a two pack, solvent free, flexible
polyurethane wearing surface.

Product Videos

Technical Details

SpECtop PU500 provides an extremely durable and hard wearing coating ideally suited to the following heavy-duty situations, such as:
. Chemical processing
. Food preparation/wet areas
. Brewing/dairy clean areas
. Hard wearing
. Good chemical resistance
. Slip resistant finish can be tailored to requirements
. Solvent free

Typical results @ 20°C±3 

 
Pot life 

25 mins 

Tack free 

5 hrs 
Foot traffic 

3 days 

Full cure 

7 days 
Tensile strength (ASTM D412) 

20 N/mm² @ 7 days 

Elongation at break (ASTM D412) 

45.0% 
Tear resistance (ASTM D624) 

35 kN/m 

Shore A Hardness (ASTM D2240) 

94 

Surface Preparation
Surfaces to be treated must be dry, sound, free from oil or other contaminants, loosely adhering coatings, laitance and dust.

Priming
The prepared surface should be primed with SpECtop Primer F1.

The contents of the curing agent should be emptied into the contents of the base component and stirred with a spatula until the product appears uniform.

The mixed primer should then be applied to the prepared substrate by a stiff brush at 10-15 m²/litre. Do not over apply.

If the primer appears to be absorbed into the surface easily, it will be necessary to apply a second coat once the initial coat is tack-free.

Allow the primer to become tacky prior to applying SpECtop PU500.

Mixing
SpECtop PU500 is supplied as a two-component kit consisting of a base component and a curing agent.

Both of the components should be briefly stirred to ensure that any settlement products are fully suspended.

The most convenient method of mixing is by using a slow speed, heavy-duty electric drill.
Empty the entire contents of the curing agent into the base component. To ensure that all material is extracted, the insides of the tins should be scraped. The curing agent and the base component should be mixed with a slow speed, heavy duty electric drill and a spiral mixing paddle for at least five minutes and until the material appears uniform in colour and consistency.

Application
Apply the mixed product either directly on the tack-free primer, depending on the system requirements. The product may be applied between 200 and 500µm using a squeegee, roller or brush.
SpECtop PU500 is supplied in 4.5 litre and 15 litre pack and covers 4 m²/litre depending on surface texture.

SpECtop Primer F1
@10-15 m²/litre     1 litre pack gives 10-15m²
5 litre packs gives 50-75m²
Contact us for more info.

Product FAQ

Bardawil Ai

Ask it Anything!

Related Products

Get a call back

Need help? The Bardawil team's got you! Send us a message with your question, and we'll quickly be in touch.

Documents

Download TDS

Need Help?

+974 5533 5711

Send Us

WhatsApp Message

Email Us

sales@bardawil.qa

Industrial Area, Stress 42, Gate B3.

Barwa Commercial Avenue, Safwa Block Building 2, 2nd Floor

SpECtop PU500

Submittal Request

Or, Get a Call Back