SpECtop CPD Linemarker
CAR PARK DECK BASED LINEMARKING
SpECtop CPD Linemarker is a two component, solvent based, UV stable, polyurethane sealer coat available in a range of colours.
Technical Details
SpECtop CPD Linemarker is typically used as a UV resistant sealer coat for the SpECtop CPD System and SpECtop range of epoxy and polyurethane resin systems. The sealed system is ideal for all weather exposure.
. UV Stable
. Hard wearing
. Good chemical resistance
. Slip resistant finish available
. Hard wearing
. Good chemical resistance
. Slip resistant finish available
| Typical results at 20±3°C | |
| Solids (%) | 68 |
| Pot life | 4 hours |
| Tack-free | 4 hours |
| Full Cure | 7 days |
| Time to recoat | 7-24 hours |
| Tensile strength (ASTM D412) | 14 N/mm² |
| Elongation at break (ASTM D412) | 50% |
| Tear resistance (ATSM D624) | 40 kN/m |
| Shore A Hardness (ASTM D2240) | 67 |
| Typical system thickness (wft) | 100µm |
Surface Preparation
Surfaces to be treated must be sound, free from oil or other contaminants, loosely adhering coatings, laitance and dust.
Priming
Not normally required.
Mixing
SpECtop CPD Linemarker is supplied in a two component kit consisting of a curing agent and pigmented base component. Pack components are pre-weighed for optimum performance. Never split or proportion packs.
Both of the liquid components should be briefly stirred to ensure that any settlement products are fully suspended. Mix with a slow speed drill and helical mixer head for 2 minutes.
Application
Immediately after mixing apply SpECtop CPD Linemarker. Apply using a medium pile roller. Ensure product is not allowed to pond on the substrate to ensure an even textured finish without discolouration due to excessive application. Allow to cure for 7 days before exposing to foot traffic.
Surfaces to be treated must be sound, free from oil or other contaminants, loosely adhering coatings, laitance and dust.
Priming
Not normally required.
Mixing
SpECtop CPD Linemarker is supplied in a two component kit consisting of a curing agent and pigmented base component. Pack components are pre-weighed for optimum performance. Never split or proportion packs.
Both of the liquid components should be briefly stirred to ensure that any settlement products are fully suspended. Mix with a slow speed drill and helical mixer head for 2 minutes.
Application
Immediately after mixing apply SpECtop CPD Linemarker. Apply using a medium pile roller. Ensure product is not allowed to pond on the substrate to ensure an even textured finish without discolouration due to excessive application. Allow to cure for 7 days before exposing to foot traffic.
SpECtop CPD Linemarker is supplied in 4.5 and 15 litre units. Typically applied at 10 m²/litre/coat.
Contact us for more info.
Bardawil AI
Ask it Anything!
- Products We Offer
- Product Spread Rate.
- Calculate Quantities
- Services We Offer.
Related Products
Get a Call Back
Need help? The Bardawil team’s got you! Send us a message with your question, and we’ll quickly be in touch.