SpECtite DPR10

POLYMER MODIFIED LIQUID BITUMEN WATERPROOFING MEMBRANE

SpECtite DPR10 is anionic latex modified bitumen
emulsion. The product contains a quantity of bio-acid
to inhibit the growth bacteria and mould both in the
product itself and subsequent to application. This
properties impart excellent durability and waterproofing characteristics

Product Videos

Technical Details

To provide a flexible waterproofing membrane to building and civil engineering structures. It is particularly suitable:
· For use as waterproofing for damp proof membrane in sandwich construction as general purpose water proofer for walls, floors, other structures, and as a vapour seal as well.
· Effective adhesive and bonding agent for insula tion boards, cork panels, etc.
· Suitable where some movements of structure is expected.
· Exhibits much better permeability and elasticity characteristics, than similar material without latex

· Cold applied
· Single component
· Water-based non-toxic
· Highly extensible
· Non-flammable
· Resist attack by chloride and sulphates
· Asbestos free

Solid contents	60%
Specific gravity	1.02 ± 0.02 @ 20°C
Drying time @ 20°C	3 hours and overcoat time 3.5 hours min.
Rubber content in the dry film	10% minimum
Elongation	1000% min.
Colour	brown, dries to black

Preparation
All surfaces must be made clean, dust and frost free to expose a sound clean substrate.

Application
Brush, roller or spraying equipment.

SpECtite DPR10 is supplied in 20 litre tins and 200 litre drums. SpECtite DPR10 should be applied at a rate of 1.25m²/litre/coat, which will give a typical system thickness of 0.77mm.