SpECcoat PE400

COAL TAR PITCH, EPOXY COATING

SpECcoat PE400 is a two part, solvent free, epoxy
resin coating system modified with specially refined
coal tar pitch. The product produces a high build,
semi flexible corrosion resistant and waterproof
coating offering excellent adhesion to a wide variety
of substrates and superior chemical resistance.

Product Videos

Technical Details

SpECcoat PE400 is particularly suited to the following situations:
· Sewage tank protection
· Sewage pipes, manholes and effluent plants
· Chemical plant linings
· Coating steel, concrete and fibre cement pipes
· Resistant to a wide range of chemicals (see Chemical Resistance Chart)
· Excellent adhesion, flexibility and waterproof characteristics
· High build abrasion resistant coating
· Can be laminated with glass fibre, if required
· May be applied by brush, roller or air less spray

Typical Results Specific gravity 

1.43 @ 20°C 
Solids content 

100% 

Pot life 

1 hour @ 20°C 
Overcoating time 

8 24 hours @ 20°C 

Full cure 

7 days @ 20°C 
Service temperature Dry 

-5°C to +65°C 

Typical system thickness 

400 µm (2 coats) 

Preparation
It is essential that adequate preparation is carried out prior to the application of SpECcoat PE400.

For concrete and steel surfaces, grit blasting is recommended. Steel surfaces should be prepared to bright metal Standard. The preparation should ensure the removal of old coatings, laitance, grease and oil.

Any imperfections or ‘blow holes’ should be filled using SpECcoat BC.

Mixing
SpECcoat PE400 is supplied in a two component kit consisting of base resin and curing agent components. The two parts are produced in the correct proportions for mixing. Part mixing of the packs should not be attempted.

Both of the components should be briefly stirred to ensure that any settlement products are fully suspended.
Empty the contents of the base component tin into the curing agent tin. To ensure that all of the base component is removed, the inside of the tin should be scraped. The material should then be mixed using a suitable slow speed electric drill with a spiral paddle attachment for three to five minutes until the product appears uniform.

Application
SpECcoat PE400 may be applied by brush, roller or airless spray. The application should produce an even coverage without pinholes.
SpECcoat PE400 is supplied in the pack sizes given below with the following recommended coverage rates:
SpECcoat PE400
4.5 litres and 15 litres
@200µm wft:
5.0 m²/litre per coat (minimum 2 coats)
Contact us for more info.

Product FAQ

Bardawil Ai

Ask it Anything!

Related Products

Get a call back

Need help? The Bardawil team's got you! Send us a message with your question, and we'll quickly be in touch.

Documents

Download TDS

Need Help?

+974 5533 5711

Send Us

WhatsApp Message

Email Us

sales@bardawil.qa

Industrial Area, Stress 42, Gate B3.

Barwa Commercial Avenue, Safwa Block Building 2, 2nd Floor

SpECcoat PE400

Submittal Request

Or, Get a Call Back