EPOXY RESIN CERAMIC TILE ADHESIVE AND GROUT

Surface Preparation
The substrate must be clean and dust free. All contaminants such as friable material, grease and oil should be removed completely.

Mixing
SpECtite ETA is supplied as a two-component pack consisting of a base component and a curing agent.

The total contents of the hardener can should be emptied into the base component and stirred thoroughly using a suitable spatula or a drill and paddle until a smooth paste which is uniform in colour, is obtained.

Application
The mixed material should be applied to the substrate using a toothed tiling comb. The tiles should be pressed firmly in place using a twisting action to ensure good contact with the adhesive.

Typical adhesive depth will be approx. 3 – 4mm.

Remove any excess adhesive from the surface of the tiles with a dry cloth immediately.

The joints between tiles may be grouted using SpECtite ETA applied by plastic spatula, working on a maximum area of 0.5m2 at a time.