SpECtite DP1000

ELASTOMERIC POLYMER MODIFIED BITUMEN MEMBRANE

SpECtite DP1000 is an anionic latex modified
bitumen emulsion suitable for brush, spraying or
trowel application.

Product Videos

Technical Details

SpECtite DP1000 is recommended for a wide variety of applications. These includes:
· Waterproofing for damp proof membrane in sandwich construction as a general purpose water proofer for walls, floors, other structures and as a vapour seal as well.
· Effective adhesive and bonding agent for insulation boards, cork panels, etc.
· Suitable where some movements of structure is expected
· Exhibits much better permeability and elasticity characteristics, than similar material without latex.

· Cold applied
· Single component
· Water based
· Highly extensible
· Non-flammable
· Resist attacks from chloride and sulphates
· Asbestos free
· Inhibits the growth of bacteria and mould both in the product itself and subsequent to application
· Excellent durabillity and waterproofing characteristics

Colour	brown, dries to black
Solids content	65%
Specific gravity	1.02 ± 0.02 @ 20°C
Rubber content	13%
Elongation	>1000%

Surface Preparation
All surfaces to be coated must be sound, clean and free from any loosely adhering material.

Application
Apply 2 coats of SpECtite DP1000 each at 1.5 litre/m²/coat to achieve 0.77mm dft by brush or trowel. The two coats shall be applied at right angles to each other, allowing the first coat to dry completely before applying the second. All application should be continued up verticals to the existing damp proof course. Drying time 3 hours @ 20°C and over coat time 3.5 hours minimum .

SpECtite DP1000 is supplied in 20 and 200 litre drums.

SpECtite DP1000 should be applied at the rate of 1.5 litre/m² per coat gives approximately 0.77mm dry film thickness.