SpECtop HF
HEAVY DUTY POLYURETHANE FLOORING
SpECtop HF is a heavy duty polyurethane based floor screed designed to provide excellent resistance to abrasion and chemical attack.
Technical Details
SpECtop HF is used in heavy duty situations such as chemical processing, food processing, brewing and engineering process areas.
. High durability
. Resistant to abrasion, impact and chemical attack
. Able to be steam cleaned at a thickness of 9mm
. Seamless and hygienic finish
. Contains unique antimicrobial additive
. Excellent chemical resistance
. Easily cleaned
. Anti-slip finish
. Low odour during installation
. Resistant to abrasion, impact and chemical attack
. Able to be steam cleaned at a thickness of 9mm
. Seamless and hygienic finish
. Contains unique antimicrobial additive
. Excellent chemical resistance
. Easily cleaned
. Anti-slip finish
. Low odour during installation
| Compressive strength (BS 6319 Part 2) | 59N/mm² | |
| Tensile strength (BS 2782:320D) | 6.5N/mm² | |
| Flexural strength (ASTM D790-84a) | 40N/mm² | |
| Elastic modulus (BS 2782:320D) | 1350N/mm² | |
| Slant shear bond strength (BS 6319) | 51N/mm² | |
| Abrasion resistance by Taber (Loss per 1000 cycles in mg/1000gm load) H22 whee | 900 | |
| RRL Slip resistance: | Wet | 60 |
| Dry | 80 | |
| Typical results @ 20°C Pot Life | 15 mins | |
| Initial film gel tim | 20 mins | |
| Light Traffic | 4 – 6 hrs | |
| Light wheeled traffic | 12 – 16 hrs | |
| Heavy duty traffic | 24 hrs | |
| Fully cured | 3 – 5 days |
Surface Preparation
It is essential that adequate preparation is carried out prior to the application of SpECtop HF.
Grit blasting is recommended and must result in the removal of all laitance, grease and oil. The resultant surface should be dry and dust free.
Priming
The prepared surface should be primed with SpECtop Primer FX.
The contents of the curing agent should be emptied into the contents of the base component and stirred with a spatula until the product appears uniform.
The mixed primer should then be applied to the prepared substrate by a stiff brush at 10-15m²/litre. Do not over apply.
If the primer appears to be absorbed into the surface easily, it will be necessary to apply a second coat once the initial coat is tack-free.
Allow the primer to become tacky prior to applying SpECtop HF.
Mixing
Pre-mixing of the coloured liquid component is recommended to ensure any light settlement is re-dispersed. Thoroughly scrape the contents of the liquid colour component into the brown hardener component and mix for a minimum of 1 minute or to provide a homogeneous mix. The resultant mixture should then be loaded into a rotary drum mixer and the aggregate component added in stages, mixing until a lump free consistency is obtained. Apply to pre-primed areas and level with a pin rake as necessary and lightly touch up with a trowel.
Application
Immediately after mixing apply SpECtop HF. Spread out using a trowel and finish using a medium pile roller. Ensure product is not allowed to pond over the blinded substrate to ensure an even textured finish is achieved. Coving can be formed using SpECtop HF Coving Mortar.
It is essential that adequate preparation is carried out prior to the application of SpECtop HF.
Grit blasting is recommended and must result in the removal of all laitance, grease and oil. The resultant surface should be dry and dust free.
Priming
The prepared surface should be primed with SpECtop Primer FX.
The contents of the curing agent should be emptied into the contents of the base component and stirred with a spatula until the product appears uniform.
The mixed primer should then be applied to the prepared substrate by a stiff brush at 10-15m²/litre. Do not over apply.
If the primer appears to be absorbed into the surface easily, it will be necessary to apply a second coat once the initial coat is tack-free.
Allow the primer to become tacky prior to applying SpECtop HF.
Mixing
Pre-mixing of the coloured liquid component is recommended to ensure any light settlement is re-dispersed. Thoroughly scrape the contents of the liquid colour component into the brown hardener component and mix for a minimum of 1 minute or to provide a homogeneous mix. The resultant mixture should then be loaded into a rotary drum mixer and the aggregate component added in stages, mixing until a lump free consistency is obtained. Apply to pre-primed areas and level with a pin rake as necessary and lightly touch up with a trowel.
Application
Immediately after mixing apply SpECtop HF. Spread out using a trowel and finish using a medium pile roller. Ensure product is not allowed to pond over the blinded substrate to ensure an even textured finish is achieved. Coving can be formed using SpECtop HF Coving Mortar.
SpECtop HF is supplied in a 29.64kg unit with a coverage rate of 18kg/m² at 9mm or 12kg/m² at 6mm.
Contact us for more info.
Bardawil AI
Ask it Anything!
- Products We Offer
- Product Spread Rate.
- Calculate Quantities
- Services We Offer.
Related Products
Get a Call Back
Need help? The Bardawil team’s got you! Send us a message with your question, and we’ll quickly be in touch.