SpECtop CPD Primer SF is suitable for providing an
excellent bond between cementitious surfaces and the
SpECtop CPD System range.
· High mechanical strength
· Produces a bond that exceeds the cohesive
strength of the parent substrate
· Solvent free
Preparation
It is essential that adequate preparation is carried out
prior to the application of SpECtop CPD Primer SF
such as grit blasting. The prepared surface should be
free from laitance, dust, algae, oil and grease.
Mixing
SpECtop CPD Primer SF is supplied in a two component kit, consisting of a base component and a curing
agent.
Both of the components should be briefly stirred to
ensure that any settlement products are fully
suspended.
The entire contents of the
curing agent should be
emptied into the base
component, ensuring that
the sides of the curing agent
tin are carefully scraped to
remove all the material.
The combined materials should then be mixed using a
suitable slow-speed drill and mixing paddle for 2 minutes until uniform. The sides of the tin should then be
scraped and mixing should continue for a further 2
minutes.
Application
The mixed product may be applied by
brush/roller/trowel. The theoretical consumption rate
is 5 m2/litre.
When applying SpECtop CPD Primer SF care should
be taken to ensure an unbroken coating. One coat
should be applied and allowed to gel.
SpECtop CPD Primer SF is supplied in 1, 2, 5 and
15 litre units. The theoretical consumption rate is 5
m²/litre.
Contact us for more info.
