SpECtop CPD Primer SB


SpECtop CPD Primer SB is a two-part, solvent
based low viscosity epoxy resin, for priming concrete
surfaces prior to the application of the SpECtop
CPD System.

Technical Details

SpECtop CPD Primer SB is suitable for providing an excellent bond between cementitious surfaces and the SpECtop CPD System range.
SpECtop CPD Primer SB has low viscosity properties, which enable the material to penetrate the substrate. This penetration and the chemical bond, which forms between the primer and the subsequently applied topping, provides a bond greater than the cohesive strength of the parent concrete.

Typical results @ 25°C Specific gravity 

Pull-off strength (ASTM D4541) 

3.0 N/mm² 

It is essential that adequate preparation is carried out prior to the application of SpECtop CPD Primer SB such as grit blasting. This preparation should ensure the removal of all grease, oil and loose material.

SpECtop CPD Primer SB is supplied in a two component kit consisting of a pigmented curing agent and a base component.
The contents of the curing agent tin should be emptied into the base component and stirred with a spatula until the product appears uniform.

The mixed primer should then be applied to the prepared substrate by a stiff brush. Care should be taken to avoid over application.

If the primer is easily absorbed into the floor, it will be necessary to apply a second coat once the initial coat is tack free.
SpECtop CPD Primer SB is supplied in 1, 5 and 15 litre units. The theoretical coverage rate is 10-15 m²/litre.
Contact us for more info.

Product Videos

Product FAQ

Bardawil Ai

Ask it Anything!

Related Products

Get a call back

Need help? The Bardawil team's got you! Send us a message with your question, and we'll quickly be in touch.


Download TDS

Need Help?

+974 5533 5711

Email Us


Industrial Area, Stress 42, Gate B3.

Barwa Commercial Avenue, Safwa Block Building 2, 2nd Floor

SpECtop CPD Primer SB

Submittal Request

Or, Get a Call Back