As a coloured finish coat over the SpECtop CPD
Primer SB/SpECtop CPD Primer SF or SpECtop
CPD Elastomeric Membrane as part of the
SpECtop CPD System.
. Hard wearing
. Good chemical resistance
. Slip resistant finish available
. Solvent free
Surface Preparation
Surfaces to be treated must be dry, sound, free from
oil or other contaminants, loosely adhering coatings,
laitance and dust.
Mixing
SpECtop CPD Finish is supplied as a two component kit consisting of a base component
and a curing agent.
Both of the components should be briefly stirred
to ensure that any settlement products are fully
suspended.
The most convenient method of mixing is by using
a slow speed, heavy-duty electric drill.
Empty the entire contents
of the curing agent into
the base component. To
ensure that all material is
extracted, the insides of
the tins should be scraped.
The curing agent and the
base component should
be mixed with a slow speed, heavy duty electric drill
and a spiral mixing paddle for at least five minutes
and until the material appears uniform in colour
and consistency.
Application
Apply the mixed product either directly on the
prepared surface, tack-free primer or on the tack
free SpECtop CPD Elastomeric, depending on the
system requirements. The product may be applied
between 0.10 – 0.20 mm using a squeegee, roller
or brush.
SpECtop CPD Finish is supplied in 4.5 litre and 15
litre pack and covers 5 m²/litre depending on
surface texture.
Contact us for more info.