SpECcoat BC
HIGH BUILD EPOXY RESIN BEDDING COMPOUND AND SKIM COAT
SpECcoat BC is a two-pack, solvent-free, thixotropic epoxy resin paste. The product produces a smooth layer suitable to receive further epoxy coatings or maybe used as a bedding layer for pre-cast concrete units.
Technical Details
SpECcoat BC is designed to fill blow holes and repair surface defects in concrete prior to the application of epoxy coatings.
SpECcoat BC may also be used as a bedding compound for pre-cast concrete elements including bridge beams, concrete kerbs and anchor bolts. Other uses include bedding slip bricks and the installation of starter bars in concrete.
SpECcoat BC may also be used as a bedding compound for pre-cast concrete elements including bridge beams, concrete kerbs and anchor bolts. Other uses include bedding slip bricks and the installation of starter bars in concrete.
· Non-slump and non-shrink
· Easy to use
· Chemically resistant to a wide range of common chemicals
· Trowels to a smooth finish
· Easy to use
· Chemically resistant to a wide range of common chemicals
· Trowels to a smooth finish
| TYPICAL VALUES @20±3°C Specific Gravity | 1.75±0.05 |
| Volume solids | 100% |
| Compressive strength | 45±5N/mm² @ 7 days |
| Pot life | 60±5 mins |
Preparation
It is essential that adequate preparation is carried out prior to the application of SpECcoat BC. All steel substrates should be sound and free from loose or flaking material. Grit blasting is required to produce a surface exhibiting bright metal finish and should be free of all contaminants.
Concrete surfaces must be fully cured and free from laitance, mould oil and curing compounds.
Mixing
SpECcoat BC is supplied in a two-component kit consisting of a base component and a curing agent.
The contents of the base can must be stirred thoroughly. The total contents of the hardener can should be added to the base container taking care to scrape the sides of the can. Mechanical mixing must be used incorporating a suitable mixing paddle attached to a heavy duty, slow speed drill.
The mixed material may be applied by a variety of tools such as trowels, scrapers, filling knives and squeegee.
It is essential that adequate preparation is carried out prior to the application of SpECcoat BC. All steel substrates should be sound and free from loose or flaking material. Grit blasting is required to produce a surface exhibiting bright metal finish and should be free of all contaminants.
Concrete surfaces must be fully cured and free from laitance, mould oil and curing compounds.
Mixing
SpECcoat BC is supplied in a two-component kit consisting of a base component and a curing agent.
The contents of the base can must be stirred thoroughly. The total contents of the hardener can should be added to the base container taking care to scrape the sides of the can. Mechanical mixing must be used incorporating a suitable mixing paddle attached to a heavy duty, slow speed drill.
The mixed material may be applied by a variety of tools such as trowels, scrapers, filling knives and squeegee.
SpECcoat BC is supplied in 3 and 5 kg packs.
Theoretical coverage
1.75kg/m² at 1mm thickness
N.B. Due to wastage factors and the varied nature of substrates, actual coverage rates may be significantly reduced.
Theoretical coverage
1.75kg/m² at 1mm thickness
N.B. Due to wastage factors and the varied nature of substrates, actual coverage rates may be significantly reduced.
Contact us for more info.
Bardawil AI
Ask it Anything!
- Products We Offer
- Product Spread Rate.
- Calculate Quantities
- Services We Offer.
Related Products
Get a Call Back
Need help? The Bardawil team’s got you! Send us a message with your question, and we’ll quickly be in touch.